The V6 Brass 51 Handle Kit was developed specifically for the Benchmade 51 balisong knife. While not ideal for flipping due to the weight of brass, these give your stock 51 a custom feel! The milled grooves and holes expose the anodized liners of the 51, creating a stunning contrast. Engineered to be a perfect fit, the V6 kit will turn your Benchmade 51 into the knife you always wanted it to be. *Knife not included.
-Weight of knife with installed brass scales - 6.42 oz.
-Milled grooves with hole design and ergonomic chamfered edges
-Polished Stonewash finish
-Precision Milled from Brass in the USA, Flytanium Design
-Includes Flytanium polishing cloth and sticker
*Installation of the scales requires some basic tools and knowledge. You will need a T6 and T8 torx bit to remove the screws and pivots. The pivots are pressure set and require some force to remove and install. A mallet/hammer is necessary. The pivots require FORCE to install flush in the scales, this is on purpose so they do not spin freely. There are some good informational videos on YouTube if you need more instructions or email us.
Disclaimer: There are many small parts and pieces on the 51. Flytanium is not responsible for lost or damaged pieces. Disassemble at your own risk.
*Please Note: Benchmade's Warranty does not cover disassembly of any knife by any person other than Benchmade’s Warranty department.